Power Transmission

Specific drive elements with high efficiency

The field of drive technology includes all elements for transmitting power and movement between different shafts. This transmission enables, for example, effective speed conversion, the control of motion sequences in industrial production facilities or the general transportation of goods. The JÄGER Group offers a wide range of products, particularly in the field of belts and bands made of rubber, plastic and various combinations of materials. In contrast to chain drives, which are highly efficient but do not allow torsion within the system, belts and tapes offer significantly lower noise levels with low maintenance requirements. For these reasons, they are used in machine and plant construction, the packaging industry, the appliance industry and agricultural machinery construction, among others.

Quick facts power transmission

Application

Narrow V-belts, high-performance narrow V-belts, classic V-belts, wide V-belts, kraftbands with narrow V-belts or classic V-belts, timing belts (chloroprene or polyurethane), ribbed belts, and others for special applications

Materials

Generally CR, EPDM, PUR (incl. fabric inserts made of PE, PA, carbon, aramid, steel or elastic tension members)

Effective lengths

Various dimensions possible, finite or endless (for PUR endless cast, welded, manufactured)

Profiles

5, Y/6, 8, Z/10, A/13, B/17, 20, C/22, 25, D/32, E/40, SPZ, SPA, SPB, SPC, 3V, 5V, 8V, 3VX, 5VX, 8MDC, MXL, XL, L, H, XH, XXH, DXL, DL, DH, 8MHL, 14 MHL, PKR0, PKR1, PKR2, PKR3, PKR 5, T2.5, T5, T10, AT3, AT5, AT10, DT5, DT10, 2L, 3L, 4L, 5L

Quantity

on request

Color

usually black (rubber), or gray (PUR)

Application	Narrow V-belts, high-performance narrow V-belts, classic V-belts, wide V-belts, kraftbands with narrow V-belts or classic V-belts, timing belts (chloroprene or polyurethane), ribbed belts, and others for special applications
Materials	Generally CR, EPDM, PUR (incl. fabric inserts made of PE, PA, carbon, aramid, steel or elastic tension members)
Effective lengths	Various dimensions possible, finite or endless (for PUR endless cast, welded, manufactured)
Profiles	5, Y/6, 8, Z/10, A/13, B/17, 20, C/22, 25, D/32, E/40, SPZ, SPA, SPB, SPC, 3V, 5V, 8V, 3VX, 5VX, 8MDC, MXL, XL, L, H, XH, XXH, DXL, DL, DH, 8MHL, 14 MHL, PKR0, PKR1, PKR2, PKR3, PKR 5, T2.5, T5, T10, AT3, AT5, AT10, DT5, DT10, 2L, 3L, 4L, 5L
Quantity	on request
Color	usually black (rubber), or gray (PUR)

Discover our range of products now!

You will find a wide range of high-quality products here – the right solution for every challenge.

Request a free sample now

Get your desired product sample free of charge by filling out our request form. Our team is happy to help!

Request sample

Free sample

Rechter Bereich

Form of address

E-Mail *

First name *

Nachname *

Company *

ZIP CODE *

City

Straße, Nr.

Sample selection

Your message

Checkboxen *

Hiermit akzeptiere ich die Datenschutzbestimmungen.

* = Pflichtfeld

Captcha

If you are human, leave this field blank.

Application areas

Non-positive drive elements

If the energy in a technical system is transmitted by the frictional forces that arise between the belt and the drive wheels, this is referred to as friction-locked drive elements. These are used wherever no synchronous movement of the elements is required and the drive may or should have slippage. We offer V-belts, V-ribbed belts and flat belts, among others, for this area. Flat belts have a rectangular cross-section and, like all non-positive drive elements, transmit energy exclusively via frictional forces. The contact surfaces of the associated drive wheels usually have upwardly curved or raised edges to prevent the belts from slipping off the pulley. V-belts are characterized by their simple installation and long service life and allow a large transmission ratio. They are manufactured wrapped or open-sided and offer a higher transmissible power than flat belts. V-ribbed belts have individual ribs that run alongside the actual belt. The larger contact surface on the V-belt pulley results in greater friction and therefore a higher power transmission than with conventional V-belts. They are very well suited for the simultaneous drive of auxiliary units.

Form-fit drive elements

If the energy in a technical system is transmitted by belts and associated drive wheels with a form-fit profile, these are referred to as form-fit drive elements. These are used when the drive requires a synchronous movement that must not exhibit any slippage. Power is not transmitted via frictional forces, but by the normal force between the belt tooth and toothed pulley. These include timing belts and toothed flat belts. Timing belts and flat timing belts made of rubber or PUR enable the low-noise transmission of high torques with low space requirements and dead weight. Due to their positioning accuracy, these belts, as finite elements, are also particularly suitable for linear drives. Timing belts can also be used to effectively perform control tasks between different elements of a system.

Our service & products

We offer a wide range of different designs in the field of drive technology. This includes, among other things

Guidelines and standards

Narrow V-belt according to

Classic V-belts according to

Other available drive technology elements

Rib belts
Round and flat belts
Special belts for special applications
V-belt and toothed belt pulleys
V-ribbed pulleys and stepped pulleys
Clamping plates and bearing elements

Blog

C-parts made of rubber or plastic also deserve attention

C-parts made of rubber or plastic are neglected by many industrial companies. Yet they harbor enormous optimization potential.

Blog

Why it pays to regularly upgrade rubber and plastic components

Product development in the rubber and plastics sector is not “fire and forget”. It pays to modernize components on a regular basis.

Blog

Why development partners should be involved in rubber and plastics projects as early as possible

Expertise from the metal sector cannot be transferred 1:1 to rubber and plastics. Better get experts on board early on!

Blog

6 tips for more supply security: how to make your resource procurement crisis-proof

When the next commodity crisis comes, be ready. Here are six tips to achieve more supply security.

Britta Rakut

Central product management

Tel. +495115358288
b.rakut@jaeger-gk.de

Power Transmission

Rechter Bereich

Application areas

Our service & products

Guidelines and standards

Other available drive technology elements

C-parts made of rubber or plastic also deserve attention

Why it pays to regularly upgrade rubber and plastic components

Why development partners should be involved in rubber and plastics projects as early as possible

6 tips for more supply security: how to make your resource procurement crisis-proof

Bereich

Sales representative

Sales representative