O‑Rings

Reliable elements of sealing technology

O-rings are used in all systems as components of sealing technology. These are endless rings with a round cross-section which are manufactured as molded parts from rubber (sometimes also from plastic). The possibility of axial or radial sealing of various fluids (gases and liquids) characterizes the simple and robust components. The JÄGER Group has a wide range of different materials and dimensions available, so that the correct parameters are available for every application. With the correct groove design and material selection, a seal can be used both stationary and moving, within the temperature limits of the material, over a long period of time. The advantage of O-rings is that they are easy to install and require little installation space.
O Ringe

Quickfacts O-rings

Application

Static sealing elements, retaining rings, rotary seals

Materials

NBR, FKM, HNBR, FFKM, EPDM, PTFE, CR, PU, silicone, AEM, ACM

Inner diameter (d1)

0.74 to 1400 mm

Cord thickness (d2)

0.6 to 30 mm

Variants

With or without coating (siliconized, PTFE coated)

Quantity

depending on order volume

Manufacture

CM, IM

Advantages

Simple installation, good service life with correct design

Color

Standard black or colored
ApplicationStatic sealing elements, retaining rings, rotary seals
MaterialsNBR, FKM, HNBR, FFKM, EPDM, PTFE, CR, PU, silicone, AEM, ACM
Inner diameter (d1)0.74 to 1400 mm
Cord thickness (d2)0.6 to 30 mm
VariantsWith or without coating (siliconized, PTFE coated)
Quantitydepending on order volume
ManufactureCM, IM
AdvantagesSimple installation, good service life with correct design
ColorStandard black or colored

Discover our range of products now!

You will find a wide range of high-quality products here – the right solution for every challenge.

Request a free sample now

Get your desired product sample free of charge by filling out our request form. Our team is happy to help!

Free sample

Rechter Bereich

Checkboxen *

* = Pflichtfeld

Application areas

O-rings are used as sealing elements in all areas of industry. Among other things, we offer

Product features

O-rings made of EPDM and NBR

As with all technical products, there is no universal solution for all areas of application for O-rings. The material as well as the dimensions and assembly of the O-rings must be adapted to the respective overall system and the given influences. If an assembly is exposed to external weather conditions, the material EPDM (ethylene propylene diene rubber) has established itself. As EPDM is highly resistant to ozone and ageing and also has good cold resistance, the material is predestined for such areas. However, EPDM is not resistant to mineral oil-based media and swells considerably under their influence. In this case, NBR (acrylonitrile butadiene rubber) is again a good choice, as this rubber is highly resistant to mineral oil-based fats and oils.

We supply O-rings in the following versions:

Guidelines and standards

Test methods

Stella Wagner

Central product management

Tel. +49 511 – 5358120
s.wagner@jaeger-gk.de

Produkte Kontakformular

Bereich

Checkboxen *
* = Pflichtfeld

Sales representative

Foto PD_1 scaled 1

Petra Dirlenbach

Sales representative

Nils_Quander_1

Nils Quander